AutoTools

205/60R16 vs 195/65R15

Within spec−2.74% rolling diameter

Fitting 195/65R15 in place of 205/60R16 changes rolling diameter by −2.7%, which is inside the 3% tolerance the industry treats as a safe substitution. The tyre is shorter and 10 mm narrower, so you need roughly 8.9 mm of extra room at the top of the arch and at the strut. Speedometer error stays small enough that most drivers never notice it, and ABS and traction control will continue to work from calibration.

Diameter change
−2.74%
−17.9 mm
Ride height
−8.9 mm
half the diameter change
Tread width
−10 mm
195 mm section
Speedo at 60
58.4
true mph when the dial reads 60

Side by side

Measure205/60R16195/65R15Change
Overall diameter25.69″24.98″−2.74%
Section width205 mm195 mm−10 mm
Sidewall height123.0 mm126.8 mm+3.8 mm
Rim diameter16″15″−1″
Revolutions / mile785807+22

Questions about this swap

Can I fit 195/65R15 instead of 205/60R16?

Yes, in most cases. The −2.7% diameter change is inside the 3% tolerance for a safe substitution, provided load index and speed rating match or exceed the original.

How much will my speedometer be out with 195/65R15 instead of 205/60R16?

By about 2.7%. At an indicated 60 mph you would actually be doing 58.4 mph, so the dial over-reads your true speed.

Does fitting 195/65R15 change ride height from 205/60R16?

Yes, by roughly 8.9 mm. Rolling radius is half the diameter change, so the axle sits that much lower and you need the same amount of extra room above the tyre.

Will my odometer read differently on 195/65R15 rather than 205/60R16?

It will read 2.7% high. Over 10,000 recorded miles that is about 274 miles of difference against the true distance travelled.

Want to try other sizes? Open the calculator.