215/55R17 vs 245/45R18
Fitting 245/45R18 in place of 215/55R17 changes rolling diameter by +1.4%, which is inside the 3% tolerance the industry treats as a safe substitution. The tyre is taller and 30 mm wider, so you need roughly 4.7 mm of extra room at the top of the arch and at the strut. Speedometer error stays small enough that most drivers never notice it, and ABS and traction control will continue to work from calibration.
- Diameter change
- +1.41%
- +9.4 mm
- Ride height
- +4.7 mm
- half the diameter change
- Tread width
- +30 mm
- 245 mm section
- Speedo at 60
- 60.8
- true mph when the dial reads 60
Side by side
| Measure | 215/55R17 | 245/45R18 | Change |
|---|---|---|---|
| Overall diameter | 26.31″ | 26.68″ | +1.41% |
| Section width | 215 mm | 245 mm | +30 mm |
| Sidewall height | 118.3 mm | 110.3 mm | −8.0 mm |
| Rim diameter | 17″ | 18″ | +1″ |
| Revolutions / mile | 767 | 756 | −11 |
Questions about this swap
›Can I fit 245/45R18 instead of 215/55R17?
Yes, in most cases. The +1.4% diameter change is inside the 3% tolerance for a safe substitution, provided load index and speed rating match or exceed the original.
›How much will my speedometer be out with 245/45R18 instead of 215/55R17?
By about 1.4%. At an indicated 60 mph you would actually be doing 60.8 mph, so the dial under-reads your true speed.
›Does fitting 245/45R18 change ride height from 215/55R17?
Yes, by roughly 4.7 mm. Rolling radius is half the diameter change, so the axle sits that much higher and you need the same amount of extra room above the tyre.
›Will my odometer read differently on 245/45R18 rather than 215/55R17?
It will read 1.4% low. Over 10,000 recorded miles that is about 141 miles of difference against the true distance travelled.
Want to try other sizes? Open the calculator.