AutoTools

225/40R18 vs 215/55R17

Borderline+4.88% rolling diameter

215/55R17 sits +4.9% away from 225/40R18 on rolling diameter — past the 3% rule but short of 5%. It will physically fit many cars, but you are trading measurable speedometer and odometer error for the look. Budget 15.5 mm of extra clearance per side, and check the inner arch at full lock before committing. On a car with torque-vectoring or adaptive cruise, have the wheel-speed calibration checked.

Diameter change
+4.88%
+31.1 mm
Ride height
+15.5 mm
half the diameter change
Tread width
−10 mm
215 mm section
Speedo at 60
62.9
true mph when the dial reads 60

Side by side

Measure225/40R18215/55R17Change
Overall diameter25.09″26.31″+4.88%
Section width225 mm215 mm−10 mm
Sidewall height90.0 mm118.3 mm+28.3 mm
Rim diameter18″17″−1″
Revolutions / mile804767−37

Questions about this swap

Can I fit 215/55R17 instead of 225/40R18?

Only with care. The diameter differs by +4.9%, outside the 3% rule, so clearance and speedometer accuracy both need checking first.

How much will my speedometer be out with 215/55R17 instead of 225/40R18?

By about 4.9%. At an indicated 60 mph you would actually be doing 62.9 mph, so the dial under-reads your true speed.

Does fitting 215/55R17 change ride height from 225/40R18?

Yes, by roughly 15.5 mm. Rolling radius is half the diameter change, so the axle sits that much higher and you need the same amount of extra room above the tyre.

Will my odometer read differently on 215/55R17 rather than 225/40R18?

It will read 4.9% low. Over 10,000 recorded miles that is about 488 miles of difference against the true distance travelled.

Want to try other sizes? Open the calculator.