AutoTools

235/45R18 vs 225/40R18

Borderline−4.71% rolling diameter

225/40R18 sits −4.7% away from 235/45R18 on rolling diameter — past the 3% rule but short of 5%. It will physically fit many cars, but you are trading measurable speedometer and odometer error for the look. Budget 15.8 mm of extra clearance per side, and check the inner arch at full lock before committing. On a car with torque-vectoring or adaptive cruise, have the wheel-speed calibration checked.

Diameter change
−4.71%
−31.5 mm
Ride height
−15.8 mm
half the diameter change
Tread width
−10 mm
225 mm section
Speedo at 60
57.2
true mph when the dial reads 60

Side by side

Measure235/45R18225/40R18Change
Overall diameter26.33″25.09″−4.71%
Section width235 mm225 mm−10 mm
Sidewall height105.8 mm90.0 mm−15.8 mm
Rim diameter18″18″0″
Revolutions / mile766804+38

Questions about this swap

Can I fit 225/40R18 instead of 235/45R18?

Only with care. The diameter differs by −4.7%, outside the 3% rule, so clearance and speedometer accuracy both need checking first.

How much will my speedometer be out with 225/40R18 instead of 235/45R18?

By about 4.7%. At an indicated 60 mph you would actually be doing 57.2 mph, so the dial over-reads your true speed.

Does fitting 225/40R18 change ride height from 235/45R18?

Yes, by roughly 15.8 mm. Rolling radius is half the diameter change, so the axle sits that much lower and you need the same amount of extra room above the tyre.

Will my odometer read differently on 225/40R18 rather than 235/45R18?

It will read 4.7% high. Over 10,000 recorded miles that is about 471 miles of difference against the true distance travelled.

Want to try other sizes? Open the calculator.