AutoTools

235/65R17 vs 225/60R17

Borderline−4.81% rolling diameter

225/60R17 sits −4.8% away from 235/65R17 on rolling diameter — past the 3% rule but short of 5%. It will physically fit many cars, but you are trading measurable speedometer and odometer error for the look. Budget 17.8 mm of extra clearance per side, and check the inner arch at full lock before committing. On a car with torque-vectoring or adaptive cruise, have the wheel-speed calibration checked.

Diameter change
−4.81%
−35.5 mm
Ride height
−17.8 mm
half the diameter change
Tread width
−10 mm
225 mm section
Speedo at 60
57.1
true mph when the dial reads 60

Side by side

Measure235/65R17225/60R17Change
Overall diameter29.03″27.63″−4.81%
Section width235 mm225 mm−10 mm
Sidewall height152.8 mm135.0 mm−17.8 mm
Rim diameter17″17″0″
Revolutions / mile695730+35

Questions about this swap

Can I fit 225/60R17 instead of 235/65R17?

Only with care. The diameter differs by −4.8%, outside the 3% rule, so clearance and speedometer accuracy both need checking first.

How much will my speedometer be out with 225/60R17 instead of 235/65R17?

By about 4.8%. At an indicated 60 mph you would actually be doing 57.1 mph, so the dial over-reads your true speed.

Does fitting 225/60R17 change ride height from 235/65R17?

Yes, by roughly 17.8 mm. Rolling radius is half the diameter change, so the axle sits that much lower and you need the same amount of extra room above the tyre.

Will my odometer read differently on 225/60R17 rather than 235/65R17?

It will read 4.8% high. Over 10,000 recorded miles that is about 481 miles of difference against the true distance travelled.

Want to try other sizes? Open the calculator.