245/45R18 vs 255/40R19
Fitting 255/40R19 in place of 245/45R18 changes rolling diameter by +1.3%, which is inside the 3% tolerance the industry treats as a safe substitution. The tyre is taller and 10 mm wider, so you need roughly 4.4 mm of extra room at the top of the arch and at the strut. Speedometer error stays small enough that most drivers never notice it, and ABS and traction control will continue to work from calibration.
- Diameter change
- +1.31%
- +8.9 mm
- Ride height
- +4.4 mm
- half the diameter change
- Tread width
- +10 mm
- 255 mm section
- Speedo at 60
- 60.8
- true mph when the dial reads 60
Side by side
| Measure | 245/45R18 | 255/40R19 | Change |
|---|---|---|---|
| Overall diameter | 26.68″ | 27.03″ | +1.31% |
| Section width | 245 mm | 255 mm | +10 mm |
| Sidewall height | 110.3 mm | 102.0 mm | −8.3 mm |
| Rim diameter | 18″ | 19″ | +1″ |
| Revolutions / mile | 756 | 746 | −10 |
Questions about this swap
›Can I fit 255/40R19 instead of 245/45R18?
Yes, in most cases. The +1.3% diameter change is inside the 3% tolerance for a safe substitution, provided load index and speed rating match or exceed the original.
›How much will my speedometer be out with 255/40R19 instead of 245/45R18?
By about 1.3%. At an indicated 60 mph you would actually be doing 60.8 mph, so the dial under-reads your true speed.
›Does fitting 255/40R19 change ride height from 245/45R18?
Yes, by roughly 4.4 mm. Rolling radius is half the diameter change, so the axle sits that much higher and you need the same amount of extra room above the tyre.
›Will my odometer read differently on 255/40R19 rather than 245/45R18?
It will read 1.3% low. Over 10,000 recorded miles that is about 131 miles of difference against the true distance travelled.
Want to try other sizes? Open the calculator.