AutoTools

255/55R18 vs 245/45R19

Borderline−4.69% rolling diameter

245/45R19 sits −4.7% away from 255/55R18 on rolling diameter — past the 3% rule but short of 5%. It will physically fit many cars, but you are trading measurable speedometer and odometer error for the look. Budget 17.3 mm of extra clearance per side, and check the inner arch at full lock before committing. On a car with torque-vectoring or adaptive cruise, have the wheel-speed calibration checked.

Diameter change
−4.69%
−34.6 mm
Ride height
−17.3 mm
half the diameter change
Tread width
−10 mm
245 mm section
Speedo at 60
57.2
true mph when the dial reads 60

Side by side

Measure255/55R18245/45R19Change
Overall diameter29.04″27.68″−4.69%
Section width255 mm245 mm−10 mm
Sidewall height140.3 mm110.3 mm−30.0 mm
Rim diameter18″19″+1″
Revolutions / mile694729+34

Questions about this swap

Can I fit 245/45R19 instead of 255/55R18?

Only with care. The diameter differs by −4.7%, outside the 3% rule, so clearance and speedometer accuracy both need checking first.

How much will my speedometer be out with 245/45R19 instead of 255/55R18?

By about 4.7%. At an indicated 60 mph you would actually be doing 57.2 mph, so the dial over-reads your true speed.

Does fitting 245/45R19 change ride height from 255/55R18?

Yes, by roughly 17.3 mm. Rolling radius is half the diameter change, so the axle sits that much lower and you need the same amount of extra room above the tyre.

Will my odometer read differently on 245/45R19 rather than 255/55R18?

It will read 4.7% high. Over 10,000 recorded miles that is about 469 miles of difference against the true distance travelled.

Want to try other sizes? Open the calculator.