AutoTools

275/40R20 vs 245/45R19

Borderline−3.42% rolling diameter

245/45R19 sits −3.4% away from 275/40R20 on rolling diameter — past the 3% rule but short of 5%. It will physically fit many cars, but you are trading measurable speedometer and odometer error for the look. Budget 12.5 mm of extra clearance per side, and check the inner arch at full lock before committing. On a car with torque-vectoring or adaptive cruise, have the wheel-speed calibration checked.

Diameter change
−3.42%
−24.9 mm
Ride height
−12.5 mm
half the diameter change
Tread width
−30 mm
245 mm section
Speedo at 60
57.9
true mph when the dial reads 60

Side by side

Measure275/40R20245/45R19Change
Overall diameter28.66″27.68″−3.42%
Section width275 mm245 mm−30 mm
Sidewall height110.0 mm110.3 mm+0.3 mm
Rim diameter20″19″−1″
Revolutions / mile704729+25

Questions about this swap

Can I fit 245/45R19 instead of 275/40R20?

Only with care. The diameter differs by −3.4%, outside the 3% rule, so clearance and speedometer accuracy both need checking first.

How much will my speedometer be out with 245/45R19 instead of 275/40R20?

By about 3.4%. At an indicated 60 mph you would actually be doing 57.9 mph, so the dial over-reads your true speed.

Does fitting 245/45R19 change ride height from 275/40R20?

Yes, by roughly 12.5 mm. Rolling radius is half the diameter change, so the axle sits that much lower and you need the same amount of extra room above the tyre.

Will my odometer read differently on 245/45R19 rather than 275/40R20?

It will read 3.4% high. Over 10,000 recorded miles that is about 342 miles of difference against the true distance travelled.

Want to try other sizes? Open the calculator.